ImageSharp: Tiled fax TIFF: tile buffer sized by TileWidth but fax decompressor writes scanlines of ImageWidth — heap OOB write

Summary

When decoding a tiled TIFF with fax compression (T4/T6/MH), DecodeTilesChunky allocates each tile buffer from TileWidth (ceil(TileWidth*bpp/8)*TileLength bytes) but constructs the fax decompressor with frame.Width: TiffDecompressorsFactory ignores the isTiled/tileWidth/tileHeight parameters entirely. The T4/T6/MH decompressors treat the full image width as the scanline length and advance (and really write, via read-modify-write bit ops) frame.Width bits per row, with no bounds check against the tile buffer. The very first tile therefore writes linearly out of bounds — about ImageWidth/8 bytes per row × TileLength rows into a TileWidth-sized buffer. With ImageWidth=4,000,000, TileWidth=16, TileLength=16 this writes ~2 MB past a 32-byte buffer and kills the process deterministically; a T6 all-white variant advances the bit offset by >512 MB silently, showing an alarm-free heap-corruption window for the same defect. A crafted file fully controls the OOB length per tile and works with perfectly legal per-row run codes (no overlong runs needed).

Verified at commit 5cd4d0d26a82a9549f297a237aea9cf665bddff8 (main; latest release v4.1.0, the supported major).

Details

Root cause: a size mismatch between tile buffer allocation and decompressor width, because the factory drops the tile parameters.

• Allocation: TiffDecoderCore.cs#L792-L794 — bytesPerTileRow = RoundUpToMultipleOfEight(tileWidth*bitsPerPixel); tile buffer = bytesPerTileRow*tileLength bytes (32 bytes in the PoC)
• Mismatch: TiffDecoderCore.cs#L797 — CreateDecompressor<TPixel>(frame.Width, ..., isTiled: true, tileWidth, tileLength) passes the full frame width
• Factory drops tile params: TiffDecompressorsFactory.cs#L56-L64 — T4/T6/MH decompressors receive only width (= frame.Width); isTiled/tileWidth/tileHeight ignored
• OOB write sink: T4TiffCompression.cs#L69-L119, T6TiffCompression.cs#L76-L108 — per-row advance of this.width bits via BitWriterUtils.WriteBits with no buffer-length check (BitWriterUtils.cs#L51); note TiffDecoderCore.cs:829-831 later reads the buffer in bytesPerTileRow strides, confirming the protocol expects tile-width rows

Attack surface: Image.Load(stream) on an attacker-supplied tiled TIFF (TiffDecoderCore.DecodeImageWithTiles → DecodeTilesChunky). Default configuration; only requirement is a standard tiled TIFF header (TileWidth=16, TileLength=16) + Compression=3 (T4; T6 also constructible).

Suggested remediation:

1. Short-term: when isTiled, construct the T4/T6/MH decompressor with tileWidth (not frame width), or clip row writes to the caller-provided buffer length.
2. Root fix: bound the write side of BitWriterUtils (pass remaining bits), and validate every fax row advance against buffer capacity on both tiled and strip paths.
3. Regression tests: Compression=2/3/4 × tiled with TileWidth < ImageWidth, including a T6 black-pixel row (forces real WriteBit).

PoC

Full PoC posted as the first comment below: Program.cs (driver), poc-tiled-t4.tif (crafted file, ~9.8 KB, base64 inline), README.

1. Build a small console project referencing src/ImageSharp/ImageSharp.csproj and run it against the crafted file (or call Image.Load on it from any host).

2. Observed with ImageWidth=4,000,000, TileWidth=16, TileLength=16, T4 with 400 makeup codes + EOL per row:

   tile payload 9642 bytes; rows write ~2,048,000 bytes into a 32-byte buffer
   Fatal error. System.AccessViolationException: Attempted to read or write protected memory.
      at SixLabors.ImageSharp.Formats.Tiff.Compression.BitWriterUtils.WriteBits(Span`1<Byte>, IntPtr, IntPtr, Byte)
      at ...T4TiffCompression.WritePixelRun(...)
      at ...T4TiffCompression.Decompress(...)
   Aborted (core dumped); exit=134
   

3. Controls: the same file with Compression=None decodes normally (container is fine); a T6 all-white-rows variant advances >512 MB of bit offset without a real write (silent corruption window) before tripping on a directory-level TileOffsets count check.

Impact

• What it is: out-of-bounds write (CWE-787). For any service decoding untrusted tiled TIFFs: remote, default-configuration, deterministic process crash (DoS), plus a heap OOB write whose per-tile length and row width are attacker-tunable — a potential code-execution surface. This is a vulnerability in the library itself, in scope of your SECURITY.md.
• Who is impacted: applications decoding untrusted TIFF with SixLabors.ImageSharp at the current major (verified on main past v4.1.0); tiled + fax-compressed files are the trigger, which ordinary TIFF writers can produce.

---

---

Reported by Kimi Security Team (bug-report@moonshot.ai).