mm: memcontrol: fix NULL pointer deref and UAF from high_work_func() on dying memcg
Severity and exploitation
KEV coverage does not rule out exploitation.
Assessment vector
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HSeverity
high7.8CVSS measures technical severity, not the likelihood of an attack.
Known exploitation
Not listed in the checked CISA KEV catalog
Absence from CISA KEV does not rule out attacks.
Public exploit
Not established by this record
Missing evidence does not mean no public exploit exists.
Remediation
Fix status not established
No structured fix or guidance is available here. Check the latest publisher advisory.
What this means
The Linux kernel has a vulnerability where a NULL pointer dereference and use-after-free can occur in high_work_func() when memory.high is exceeded in a non-task context. This issue is specific to MGLRU and was introduced with the memcg LRU. The vulnerability can cause a general protection fault.
Summarized by @cf/meta/llama-3.3-70b-instruct-fp8-fast. Verify details against the original sources.Attack conditions
No attack-condition excerpt has been identified here. Review the full source description and references for authentication, network access, and configuration requirements.
Review supporting sources →Affected versions
Check the exact model, release, and any platform requirements against your installation.
Linux · Linux
Linux
4 ranges
Linux · Linux
Linux
Compare with this publisher’s ranges. This does not inspect your installation.
affected
e4dde56cd208674ce899b47589f263499e5b8cdc → before a44855f25821082e384503abf01a45a5c65a80de
git versions
e4dde56cd208674ce899b47589f263499e5b8cdc → before 301ac490daf619b8affe12b07e2d68c99adcda79
git versions
e4dde56cd208674ce899b47589f263499e5b8cdc → before b558ac673e65b4f302f105a0d9f79fb7cf012330
git versions
e4dde56cd208674ce899b47589f263499e5b8cdc → before dd94d8c7660a60dbfcd425e0d10120de6d02a7bd
git versions
Other versions: unaffected
Linux · Linux
Linux
6 ranges
Linux · Linux
Linux
Compare with this publisher’s ranges. This does not inspect your installation.
affected
6.3
unaffected
0 → before 6.3
semver versions
6.12.118 → through 6.12.*
semver versions
6.18.64 → through 6.18.*
semver versions
7.3.5 → through 7.3.*
semver versions
7.4-rc2 → through *
original_commit_for_fix versions
Other versions: affected
What to do
Compare your installed product and version with the affected versions above. A matching product name alone does not confirm exposure.
No structured fix or remediation guidance is available here. Check the full source description and vendor’s latest advisory for a patch or workaround; do not assume another version is safe.
cve.new guidance unless attributed to a publisher. This page does not inspect your installation.
Public exploit evidence
No public exploit reference is identified in the imported evidence. This is not a claim that no exploit exists.
Original source description
Read the full publisher description
In the Linux kernel, the following vulnerability has been resolved:
mm: memcontrol: fix NULL pointer deref and UAF from high_work_func() on dying memcg
When memory.high is exceeded in non-task context, try_charge_memcg() schedules memcg->high_work without taking a reference on the memcg, and high_work_func() invokes reclaim_high() without pinning the memcg.
With obj_cgroup reparenting, introduced in commit bf4f059954dc ("mm: memcg/slab: obj_cgroup API"), objects charged to a child memcg are reparented to its parent in mem_cgroup_css_offline() instead of holding a reference on the child until uncharged. Subsequent uncharges of those objects go to the parent, which can leave the child's memory use permanently above its high limit, so any later charge on the offlined memcg in non-task context schedules high_work. This was later widened from kernel memory to LRU folios when commit f1cf8d2f36dc ("mm: memcontrol: eliminate the problem of dying memory cgroup for LRU folios") converted LRU folios to use obj_cgroup reparenting.
cancel_work_sync(&memcg->high_work) only runs at the end of teardown in mem_cgroup_css_free(), so high_work_func() can start or still be running reclaim_high() after mem_cgroup_css_released() or shrink_many() has called lru_gen_release_memcg() and unhashed lruvec->lrugen.list. If reclaim tries to rotate the memcg, lru_gen_rotate_memcg() dereferences a NULL pprev pointer. This issue is specific to MGLRU and was introduced with the memcg LRU in commit e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists").
With either traditional LRU or MGLRU, css_free_rwork_fn() calls css_rstat_exit() which frees per-CPU rstat data before calling mem_cgroup_css_free(). If reclaim_high() is still running, rstat updates via mod_lruvec_state() -> __css_rstat_updated() cause a use-after-free on the per-CPU rstat data. This was introduced when commit 5da3bfa029d6 ("cgroup: use separate rstat trees for each subsystem") moved css_rstat_exit() ahead of ss->css_free().
Fix both problems by acquiring a reference with css_tryget_online() in high_work_func() before calling reclaim_high(), and by resetting memory.high and swap.high to PAGE_COUNTER_MAX in mem_cgroup_css_offline() so that charges via references on an offlined memcg do not trigger high_work on the dead child and skip checking live ancestors in try_charge_memcg().
Acquiring the reference in high_work_func() rather than before scheduling high_work is safe because mem_cgroup_css_free() calls irq_work_sync() and cancel_work_sync() which cancels pending work and waits for an already running high_work_func() to complete before mem_cgroup_free() frees the memcg. css_tryget_online() uses percpu_ref_tryget_live() and is safe to call after percpu_ref_exit() before the cgroup is freed unlike css_tryget().
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 27 Comm: kworker/1:0 Tainted: G B W 7.3.0-rc5-g2bba28e98578 #284 PREEMPT(full) Tainted: [B]=BAD_PAGE, [W]=WARN <-- Taint from lru_gen_rotate_memcg() VM_WARN_ON_ONCE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 Workqueue: events high_work_func RIP: 0010:lru_gen_rotate_memcg+0x1a3/0xe90 Call Trace: <TASK> ? read_ctrl_pos+0x22f/0x3f0 shrink_lruvec+0x16cb/0x1b80 ? ret_from_fork_asm+0x1a/0x30 ? lapic_next_event+0x15/0x20 ? clockevents_program_event+0x2bb/0x6f0 ? lapic_next_event+0x15/0x20 ? __pfx_shrink_lruvec+0x10/0x10 ? __pfx_clockevents_program_event+0x10/0x10 ? _raw_spin_lock+0x84/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? kasan_save_stack+0x30/0x50 ? psi_group_change+0x381/0x740 ? __pfx_sched_clock_cpu+0x10/0x10 ? save_fpregs_to_fpstate+0xc4/0x2c0 ? finish_task_switch.isra.0+0x1de/0xac0 ? __schedule+0xf62/0x42c0 ? __pfx___schedule+0x10/0x10 ? __pfx___irq_work_queue_lo ---truncated---
References
4 sourcesInside the record
Evidence available
Describes the evidence in this view, not whether the product is safe.
Original records
CVE-2026-99697View the latest unmodified CVE JSON from the official source. It may be newer than this imported page.
cve.new JSON →Environment requirements
These conditions apply together as specified by the publisher. A matching product name alone does not establish exposure.
Linux · platform conditions
Any condition may hold
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 6.3
Before: 6.12.118
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 6.3
Before: 6.18.64
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 6.3
Before: 7.3.5
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 6.3
Before: 7.4-rc2
Applicability preview
[
{
"nodes": [
{
"operator": "OR",
"negate": false,
"cpeMatch": [
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "6.3",
"versionEndExcluding": "6.12.118"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "6.3",
"versionEndExcluding": "6.18.64"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "6.3",
"versionEndExcluding": "7.3.5"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "6.3",
"versionEndExcluding": "7.4-rc2"
}
]
}
]
}
]Contributing organizations · 1
Assigning organization
Timeline
All times UTCAdvisory published
Publication date supplied by the source.
Source updated
Latest modification date supplied by the source.
Last imported by cve.new
Latest catalog import, not the date we first saw this advisory.
What changed
Follow changes- CVE · CVE-2026-99697
Observed 2026-11-22T11:23:27.832Z · upstream updated 2026-11-22T11:09:47.872Z
Severity assessment changed
before
[]
after
[ { "source": "Linux", "vector": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "score": 7.8 } ]
Large field values are marked as truncated previews. Original source snapshots remain retained.
Showing up to 50 most recent observed changes.