ocfs2: find the xattr entry again after converting a block to a bucket
Severity and exploitation
KEV coverage does not rule out exploitation.
Severity
unknownCVSS measures technical severity, not the likelihood of an attack.
Known exploitation
Not listed in the checked CISA KEV catalog
Absence from CISA KEV does not rule out attacks.
Public exploit
Not established by this record
Missing evidence does not mean no public exploit exists.
Remediation
Fix status not established
No structured fix or guidance is available here. Check the latest publisher advisory.
What this means
In the Linux kernel, the following vulnerability has been resolved:
Source excerpt · LinuxAttack conditions
No attack-condition excerpt has been identified here. Review the full source description and references for authentication, network access, and configuration requirements.
Review supporting sources →Affected versions
Check the exact model, release, and any platform requirements against your installation.
Linux · Linux
Linux
4 ranges
Linux · Linux
Linux
Compare with this publisher’s ranges. This does not inspect your installation.
affected
012255961c9ecfe22b7a1df47ac26ab37818cb1e → before 49820bda28134ab0f6748e66cb104c9adcc2e116
git versions
012255961c9ecfe22b7a1df47ac26ab37818cb1e → before 1ca9787e733a29aea926f8956dffc41bf553c5ca
git versions
012255961c9ecfe22b7a1df47ac26ab37818cb1e → before 2bd2ca4f70570f08992ba38dbf2570f8def4288e
git versions
012255961c9ecfe22b7a1df47ac26ab37818cb1e → before 9c191a7a44882487e291e09f095d2ae4d7cca146
git versions
Other versions: unaffected
Linux · Linux
Linux
6 ranges
Linux · Linux
Linux
Compare with this publisher’s ranges. This does not inspect your installation.
affected
2.6.28
unaffected
0 → before 2.6.28
semver versions
6.12.118 → through 6.12.*
semver versions
6.18.64 → through 6.18.*
semver versions
7.3.5 → through 7.3.*
semver versions
7.4-rc2 → through *
original_commit_for_fix versions
Other versions: affected
What to do
Compare your installed product and version with the affected versions above. A matching product name alone does not confirm exposure.
No structured fix or remediation guidance is available here. Check the full source description and vendor’s latest advisory for a patch or workaround; do not assume another version is safe.
cve.new guidance unless attributed to a publisher. This page does not inspect your installation.
Public exploit evidence
No public exploit reference is identified in the imported evidence. This is not a claim that no exploit exists.
Original source description
Read the full publisher description
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: find the xattr entry again after converting a block to a bucket
ocfs2_xattr_create_index_block() turns a non-indexed xattr block into a tree by copying it into a bucket, and the copy sorts the entries: a block holds them in insertion order, a bucket by name hash. ocfs2_xattr_update_xattr_search() nevertheless relocates the caller's search by the index the entry had in the block, so unless the two orders agreed it points at an unrelated entry, and nothing between there and the write compares that entry's name with the one being set.
Setting an xattr whose new value no longer fits the block arrives here with xs->not_found clear. The block gave up because ocfs2_xa_block_can_reuse() wants an exact namevalue size match, while ocfs2_xa_bucket_can_reuse() only wants an entry at least as large as the new one, so the bucket accepts a pair the block rejected and the update lands on whichever entry the sort left at that index. Equal padded name lengths get that other attribute's value replaced in place and its name left alone, so setxattr returns success while the attribute asked for keeps its old value. A longer one trips ocfs2_xa_reuse_entry()'s BUG_ON, and a shorter one is refused by the bucket as well, so ocfs2_xa_prepare_entry() wipes the entry and writes the new name over it, leaving xe_name_hash describing a name that is no longer there.
Find the entry again by the name being set, matching the type as well. The copy carries every entry and every name over unchanged, and (type, name) pairs are unique within a block, so the match is exact. The type matters because the handlers strip their prefix before calling ocfs2_xattr_set(), so user.foo and trusted.foo share a stored name, a stored length and a hash, and both can sit in the same block.
The name has to come from xi rather than from xs->here: a failed set can remove the entry xs->here names, and only the "growing" caller sets ctxt->set_abort, which is what stops the conversion. Scan every entry rather than narrowing on the hash the way ocfs2_find_xe_in_bucket() does, since an existing entry keeps the hash it was stored under, which a kernel that sign-extended the name bytes made different from the one computed now. An empty result means the entry did not survive the failed set and this has become an insert; leaving xs->here alone would keep it pointing into the block, which is rewritten as a tree root before the caller reads it again.
References
4 sourcesInside the record
Evidence available
Describes the evidence in this view, not whether the product is safe.
Original records
CVE-2026-99695View the latest unmodified CVE JSON from the official source. It may be newer than this imported page.
cve.new JSON →Environment requirements
These conditions apply together as specified by the publisher. A matching product name alone does not establish exposure.
Linux · platform conditions
Any condition may hold
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 2.6.28
Before: 6.12.118
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 2.6.28
Before: 6.18.64
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 2.6.28
Before: 7.3.5
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 2.6.28
Before: 7.4-rc2
Applicability preview
[
{
"nodes": [
{
"operator": "OR",
"negate": false,
"cpeMatch": [
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "2.6.28",
"versionEndExcluding": "6.12.118"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "2.6.28",
"versionEndExcluding": "6.18.64"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "2.6.28",
"versionEndExcluding": "7.3.5"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "2.6.28",
"versionEndExcluding": "7.4-rc2"
}
]
}
]
}
]Contributing organizations · 1
Assigning organization
Timeline
All times UTCAdvisory published
Publication date supplied by the source.
Last imported by cve.new
Latest catalog import, not the date we first saw this advisory.
What changed
Follow changesLarge field values are marked as truncated previews. Original source snapshots remain retained.