Investigate in your agent.

Turn this advisory into a focused investigation. Ask your agent to check your project’s versions, explain the evidence, and suggest a compatible fix.

Your agent needs remote MCP support and access to https://cve.new/mcp.

Read the setup guide

Skip to content
Check your stack
CVE-2026-99638

net/sched: clamp skb->queue_mapping before indexing the tx queue

Products / packages Linux

Published

Share

Severity and exploitation

Not in CISA KEVNo CVSS score

KEV coverage does not rule out exploitation.

KEV checked 22/11/2026, 12:10:35 UTC

Severity

unknown

CVSS measures technical severity, not the likelihood of an attack.

Known exploitation

Not listed in the checked CISA KEV catalog

Absence from CISA KEV does not rule out attacks.

Public exploit

Not established by this record

Missing evidence does not mean no public exploit exists.

Remediation

Fix status not established

No structured fix or guidance is available here. Check the latest publisher advisory.

What this means

In the Linux kernel, the following vulnerability has been resolved:

Source excerpt · Linux

Attack conditions

No attack-condition excerpt has been identified here. Review the full source description and references for authentication, network access, and configuration requirements.

Review supporting sources →

Affected versions

Check the exact model, release, and any platform requirements against your installation.

Linux · Linux

Linux

4 ranges

Compare with this publisher’s ranges. This does not inspect your installation.

affected

74e31ca850c1cddeca03503171dd145b6ce293b6 → before 8182ba13500b39d75b66fe9f37e13cb325c4b17e

git versions

74e31ca850c1cddeca03503171dd145b6ce293b6 → before 7445eccce376f7adb876c9f466d7d893344af7ce

git versions

74e31ca850c1cddeca03503171dd145b6ce293b6 → before 7327092a678bfcb1bae033acb1be1006a1399e30

git versions

74e31ca850c1cddeca03503171dd145b6ce293b6 → before f19f2b308beb158d0e6f6eb806ced636e4ebf6ce

git versions

unaffected

unknown

Other versions: unaffected

Linux · Linux

Linux

6 ranges

Compare with this publisher’s ranges. This does not inspect your installation.

affected

5.1

unaffected

0 → before 5.1

semver versions

6.12.118 → through 6.12.*

semver versions

6.18.64 → through 6.18.*

semver versions

7.3.5 → through 7.3.*

semver versions

7.4-rc2 → through *

original_commit_for_fix versions

unknown

Other versions: affected

Automatic dependency matching is unavailable for this record. Use the product evidence and publisher’s instructions to check your installation.

What to do

Compare your installed product and version with the affected versions above. A matching product name alone does not confirm exposure.

No structured fix or remediation guidance is available here. Check the full source description and vendor’s latest advisory for a patch or workaround; do not assume another version is safe.

cve.new guidance unless attributed to a publisher. This page does not inspect your installation.

Public exploit evidence

No public exploit reference is identified in the imported evidence. This is not a claim that no exploit exists.

Original source description

Read the full publisher description

In the Linux kernel, the following vulnerability has been resolved:

net/sched: clamp skb->queue_mapping before indexing the tx queue

This issue was caught by Sashiko (nipa). A producer-side path cap is already merged (ea4d4b5dddb5); this patch adds the matching consumer-side caps.

The issue: The tx queue is picked and capped in netdev_core_pick_tx() before the __dev_xmit_skb() qdisc enqueue path. A tc BPF program running inside an egress qdisc (not clsact) can then change __sk_buff->queue_mapping; that store is never re-checked. bpf_convert_ctx_access() bounds it only by NO_QUEUE_MAPPING, not by the device's queue count.

Two consumers read the stale value:

  • On dequeue, qdisc_restart() calls netdev_get_tx_queue(), which indexes dev->_tx[]. netdev_get_tx_queue() guards it with just a DEBUG_NET_WARN_ON_ONCE, so sch_direct_xmit() takes the out-of-bounds txq->_xmit_lock and writes txq->xmit_lock_owner past the end of the allocation on non-lltx devices such as ifb. Drivers that index their rings from skb_get_queue_mapping() (ex: ifb) go out of range the same way.

  • On enqueue, taprio_enqueue() indexes q->qdiscs[] with the same value; the array is sized dev->num_tx_queues. A duplicating netem on a child qdisc clones the skb and re-enqueues the clone at the taprio root (qdisc_root_bh()) through a direct rootq->enqueue() call, so the value reaches taprio_enqueue() before any dequeue cap runs.

The Fix: Cap the mapping at the consumers and write the capped value back, so the qdisc's _tx[] lookup, the taprio q->qdiscs[] lookup and any later driver read stay in range.

On the dequeue side the cap folds into the dequeue path instead of a separate walk over the returned list: dequeue_skb() caps the head, and each bulk helper caps the element it appends. For a qdisc that is not TCQ_F_ONETXQUEUE, netdev_cap_txqueue() logs a ratelimited notice and selects queue 0.

A TCQ_F_ONETXQUEUE qdisc is bound to a single tx queue: dequeue_skb() uses q->dev_queue for the frozen check, the BQL limit and the trace point, while qdisc_restart() transmits on the skb's queue. Capping an out-of-range mapping to queue 0 would therefore send a per-queue child's skb through a different queue than the one it was dequeued for. On mq, mqprio, taprio and htb offload children, a stopped queue 0 could then park the list in q->gso_skb, and the later wake would schedule queue 0's own child instead of this qdisc. Pin a TCQ_F_ONETXQUEUE mapping to the qdisc's own queue to keep the documented invariant.

The pin covers every mapping, not only an out-of-range one: an in-range mapping that a filter sets on one of those per-queue children is rewritten to the child's own queue, and this path does not call netdev_cap_txqueue(), so it logs no notice. On a single-queue device qdisc_create() sets TCQ_F_ONETXQUEUE, so the one-queue trigger described below also takes this branch and is corrected without a notice.

That also keeps a bulk list on one queue by construction: every element of a TCQ_F_ONETXQUEUE qdisc, including a follower changed by a filter, is pinned to q->dev_queue before it is appended. The fast bulk helper therefore needs no head comparison and no skb_bad_txq requeue; the slow helper, used only by non-ONETXQUEUE qdiscs, still compares and requeues a mismatched follower, where a wake on any queue reschedules q.

On the enqueue side taprio_enqueue() caps the mapping against real_num_tx_queues and writes it back before selecting q->qdiscs[queue], so a duplicating child cannot steer the clone out of the array.

Conditions to recreate the bug: The dequeue path: load a SCHED_CLS or SCHED_ACT program that stores __sk_buff->queue_mapping (a tc BPF action is enough), attach it to a transmit qdisc (for example a matchall filter on a prio root), and send a packet. With a 1-queue device a store of 1 indexes one past dev->_tx[]. Under KASAN with panic_on_warn=1 the unfixed kernel faults with "BUG: KASAN: slab-out- ---truncated---

References

4 sources

Inside the record

Evidence available

Package identity · not supplied
Version evidence
Remediation guidance · not supplied
Weakness classification · not supplied
Additional publishers · not supplied

Describes the evidence in this view, not whether the product is safe.

Original records

CVE-2026-99638

View the latest unmodified CVE JSON from the official source. It may be newer than this imported page.

cve.new JSON →

Environment requirements

These conditions apply together as specified by the publisher. A matching product name alone does not establish exposure.

Linux · platform conditions

Any condition may hold

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 5.1

Before: 6.12.118

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 5.1

Before: 6.18.64

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 5.1

Before: 7.3.5

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 5.1

Before: 7.4-rc2

Applicability preview
[
  {
    "nodes": [
      {
        "operator": "OR",
        "negate": false,
        "cpeMatch": [
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "5.1",
            "versionEndExcluding": "6.12.118"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "5.1",
            "versionEndExcluding": "6.18.64"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "5.1",
            "versionEndExcluding": "7.3.5"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "5.1",
            "versionEndExcluding": "7.4-rc2"
          }
        ]
      }
    ]
  }
]
Contributing organizations · 1
Linux

Assigning organization

2026-11-20

Timeline

All times UTC
  1. Advisory published

    Publication date supplied by the source.

  2. Last imported by cve.new

    Latest catalog import, not the date we first saw this advisory.

What changed

Follow changes
No substantive changes have been recorded here yet. History starts when cve.new observes a change after tracking is enabled; earlier edits are not reconstructed.

Large field values are marked as truncated previews. Original source snapshots remain retained.