drm/etnaviv: Flush the tile status cache through both the PE and BLT
Severity and exploitation
KEV coverage does not rule out exploitation.
Severity
unknownCVSS measures technical severity, not the likelihood of an attack.
Known exploitation
Not listed in the checked CISA KEV catalog
Absence from CISA KEV does not rule out attacks.
Public exploit
Not established by this record
Missing evidence does not mean no public exploit exists.
Remediation
Fix status not established
No structured fix or guidance is available here. Check the latest publisher advisory.
What this means
In the Linux kernel, the following vulnerability has been resolved:
Source excerpt · LinuxAttack conditions
No attack-condition excerpt has been identified here. Review the full source description and references for authentication, network access, and configuration requirements.
Review supporting sources →Affected versions
Check the exact model, release, and any platform requirements against your installation.
Linux · Linux
Linux
6 ranges
Linux · Linux
Linux
Compare with this publisher’s ranges. This does not inspect your installation.
affected
f232d9ec029ce3e2543b05213e2979e01e503408 → before 0abbe840a90d2cb568781fd031e514674c397cff
git versions
f232d9ec029ce3e2543b05213e2979e01e503408 → before 8cd026a2cec3e4ceb4542ba443d9049724ae4a30
git versions
f232d9ec029ce3e2543b05213e2979e01e503408 → before e75d39dc2a4dbfa6064bd7e59e0cf5d3d1b89b6d
git versions
f232d9ec029ce3e2543b05213e2979e01e503408 → before c1a757f8df1363032623fa9b1baaba0dcf34de6d
git versions
538caddbe635d3ca18e0f02276e76c124eb3c604
git versions
5.4.63 → before 5.5
semver versions
Other versions: unaffected
Linux · Linux
Linux
6 ranges
Linux · Linux
Linux
Compare with this publisher’s ranges. This does not inspect your installation.
affected
5.7
unaffected
0 → before 5.7
semver versions
6.12.118 → through 6.12.*
semver versions
6.18.64 → through 6.18.*
semver versions
7.3.5 → through 7.3.*
semver versions
7.4-rc2 → through *
original_commit_for_fix versions
Other versions: affected
What to do
Compare your installed product and version with the affected versions above. A matching product name alone does not confirm exposure.
No structured fix or remediation guidance is available here. Check the full source description and vendor’s latest advisory for a patch or workaround; do not assume another version is safe.
cve.new guidance unless attributed to a publisher. This page does not inspect your installation.
Public exploit evidence
No public exploit reference is identified in the imported evidence. This is not a claim that no exploit exists.
Original source description
Read the full publisher description
In the Linux kernel, the following vulnerability has been resolved:
drm/etnaviv: Flush the tile status cache through both the PE and BLT
Since commit f232d9ec029c ("drm/etnaviv: fix TS cache flushing on GPUs with BLT engine"), jobs on GPUs with a BLT engine use a BLT command to flush the tile status cache instead of TS_FLUSH_CACHE, which is broken on most of these GPUs.
GC7000 r6008/r6009 and GC8200 r6401 are the other way around: TS_FLUSH_CACHE works, but the BLT command does not flush the cache. The vendor driver handles these GPUs using TS_FLUSH_CACHE, but the etnaviv kernel driver has no way to identify them.
As a result, dirty tile status cache lines survive the end of a job. They are written back by the next cache flush, using the page table of the job issuing it. If that job belongs to another process, the write goes to the wrong address space.
On GC7000 r6009 this causes MMU faults and GPU recoveries blamed on an innocent process. I see around 1100 per run of a multisample depth/stencil test running alongside two other GPU clients.
Emit both flushes at the end of every job on GPUs with a BLT engine. Whichever does not work on a given GPU is a no-op. Since dirty lines are only written back once, this costs one additional state load per job.
References
4 sourcesInside the record
Evidence available
Describes the evidence in this view, not whether the product is safe.
Original records
CVE-2026-99604View the latest unmodified CVE JSON from the official source. It may be newer than this imported page.
cve.new JSON →Environment requirements
These conditions apply together as specified by the publisher. A matching product name alone does not establish exposure.
Linux · platform conditions
Any condition may hold
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 5.7
Before: 6.12.118
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 5.7
Before: 6.18.64
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 5.7
Before: 7.3.5
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 5.7
Before: 7.4-rc2
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 5.4.63
Applicability preview
[
{
"nodes": [
{
"operator": "OR",
"negate": false,
"cpeMatch": [
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "5.7",
"versionEndExcluding": "6.12.118"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "5.7",
"versionEndExcluding": "6.18.64"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "5.7",
"versionEndExcluding": "7.3.5"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "5.7",
"versionEndExcluding": "7.4-rc2"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "5.4.63"
}
]
}
]
}
]Contributing organizations · 1
Assigning organization
Timeline
All times UTCAdvisory published
Publication date supplied by the source.
Last imported by cve.new
Latest catalog import, not the date we first saw this advisory.
What changed
Follow changesLarge field values are marked as truncated previews. Original source snapshots remain retained.