Investigate in your agent.

Turn this advisory into a focused investigation. Ask your agent to check your project’s versions, explain the evidence, and suggest a compatible fix.

Your agent needs remote MCP support and access to https://cve.new/mcp.

Read the setup guide

Skip to content
Check your stack
CVE-2026-99464

media: redrat3: fix UAF in probe error path leaving rc device registered

Products / packages Linux

Published

Share

Severity and exploitation

Not in CISA KEVNo CVSS score

KEV coverage does not rule out exploitation.

KEV checked 22/11/2026, 11:55:32 UTC

Severity

unknown

CVSS measures technical severity, not the likelihood of an attack.

Known exploitation

Not listed in the checked CISA KEV catalog

Absence from CISA KEV does not rule out attacks.

Public exploit

Not established by this record

Missing evidence does not mean no public exploit exists.

Remediation

Fix status not established

No structured fix or guidance is available here. Check the latest publisher advisory.

What this means

In the Linux kernel, the following vulnerability has been resolved:

Source excerpt · Linux

Attack conditions

No attack-condition excerpt has been identified here. Review the full source description and references for authentication, network access, and configuration requirements.

Review supporting sources →

Affected versions

Check the exact model, release, and any platform requirements against your installation.

Linux · Linux

Linux

4 ranges

Compare with this publisher’s ranges. This does not inspect your installation.

affected

2154be651b90ab0e6b5e9b9cf127a75429f9e90c → before d8f44a9e4820797067b8cdf1b6a4cb0c0ae3d143

git versions

2154be651b90ab0e6b5e9b9cf127a75429f9e90c → before 98e3df13c9fd57cc4051e9ee1717cfc65ee04c7d

git versions

2154be651b90ab0e6b5e9b9cf127a75429f9e90c → before e0e12b25b102e22f17ec3d0c00eb22ef7b792489

git versions

2154be651b90ab0e6b5e9b9cf127a75429f9e90c → before af452b9e01331b5338a1e5141624f17607239207

git versions

unaffected

unknown

Other versions: unaffected

Linux · Linux

Linux

6 ranges

Compare with this publisher’s ranges. This does not inspect your installation.

affected

3.0

unaffected

0 → before 3.0

semver versions

6.12.117 → through 6.12.*

semver versions

6.18.61 → through 6.18.*

semver versions

7.3.2 → through 7.3.*

semver versions

7.4-rc1 → through *

original_commit_for_fix versions

unknown

Other versions: affected

Automatic dependency matching is unavailable for this record. Use the product evidence and publisher’s instructions to check your installation.

What to do

Compare your installed product and version with the affected versions above. A matching product name alone does not confirm exposure.

No structured fix or remediation guidance is available here. Check the full source description and vendor’s latest advisory for a patch or workaround; do not assume another version is safe.

cve.new guidance unless attributed to a publisher. This page does not inspect your installation.

Public exploit evidence

No public exploit reference is identified in the imported evidence. This is not a claim that no exploit exists.

Original source description

Read the full publisher description

In the Linux kernel, the following vulnerability has been resolved:

media: redrat3: fix UAF in probe error path leaving rc device registered

redrat3 stores its device name and phys path inside the main rr3 structure, and the rc device's device_name and input_phys point into rr3. When the RC device is registered, it keeps those pointers.

KASAN: slab-use-after-free in string_nocheck lib/vsprintf.c:648 Read of size 1 at addr ffff888051fda758 by task udevd/7464 Call Trace: string_nocheck lib/vsprintf.c:648 [inline] string+0x216/0x2d0 lib/vsprintf.c:730 vsnprintf+0x74a/0xef0 lib/vsprintf.c:2945 vscnprintf+0x41/0x90 lib/vsprintf.c:3014 sysfs_emit+0x10e/0x180 fs/sysfs/file.c:761 input_dev_show_name+0x58/0x70 drivers/input/input.c:1282

Allocated by task 10: redrat3_dev_probe+0x477/0x2570 drivers/media/rc/redrat3.c:1023 Freed by task 10: redrat3_delete drivers/media/rc/redrat3.c:466 [inline] redrat3_dev_probe+0x1bf4/0x2570 drivers/media/rc/redrat3.c:1124

Syzkaller triggers this via usb probing. It probes the RedRat3 USB interface, which calls redrat3_dev_probe() in redrat3.c. That function allocates rr3, then builds an rc device whose name points into rr3 via redrat3_init_rc_dev() in redrat3.c, and registers it with rc_register_device().

When the detector enable fails after the RC device is registered, the probe jumps to the led_free path. That path unregisters the LED but does not unregister the RC device before freeing rr3 via redrat3_delete() in redrat3.c. The RC device still holds device_name = rr3->name which is now freed.

Later udevd reads /sys/.../input device name via sysfs_emit() in file.c, which calls input_dev_show_name() in input.c, which emits dev->name which is the freed rr3->name.

When the detector enable fails after the RC device is registered, the error path must not leave the RC device registered. Make the probe error path clean up the same way redrat3_dev_disconnect() does.

This change should be safe because the RC device is fully registered at this point and its teardown via rc_unregister_device() is protected by the input device mutex, and rr3 is still alive during unregister so device_name remains valid until after unregister. The URBs are killed before rc_free, so no completion can run after rc is freed. No new lock ordering is introduced.

References

4 sources

Inside the record

Evidence available

Package identity · not supplied
Version evidence
Remediation guidance · not supplied
Weakness classification · not supplied
Additional publishers · not supplied

Describes the evidence in this view, not whether the product is safe.

Original records

CVE-2026-99464

View the latest unmodified CVE JSON from the official source. It may be newer than this imported page.

cve.new JSON →

Environment requirements

These conditions apply together as specified by the publisher. A matching product name alone does not establish exposure.

Linux · platform conditions

Any condition may hold

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 3.0

Before: 6.12.117

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 3.0

Before: 6.18.61

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 3.0

Before: 7.3.2

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 3.0

Before: 7.4-rc1

Applicability preview
[
  {
    "nodes": [
      {
        "operator": "OR",
        "negate": false,
        "cpeMatch": [
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "3.0",
            "versionEndExcluding": "6.12.117"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "3.0",
            "versionEndExcluding": "6.18.61"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "3.0",
            "versionEndExcluding": "7.3.2"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "3.0",
            "versionEndExcluding": "7.4-rc1"
          }
        ]
      }
    ]
  }
]
Contributing organizations · 1
Linux

Assigning organization

2026-11-19

Timeline

All times UTC
  1. Advisory published

    Publication date supplied by the source.

  2. Last imported by cve.new

    Latest catalog import, not the date we first saw this advisory.

What changed

Follow changes
No substantive changes have been recorded here yet. History starts when cve.new observes a change after tracking is enabled; earlier edits are not reconstructed.

Large field values are marked as truncated previews. Original source snapshots remain retained.