Investigate in your agent.

Turn this advisory into a focused investigation. Ask your agent to check your project’s versions, explain the evidence, and suggest a compatible fix.

Your agent needs remote MCP support and access to https://cve.new/mcp.

Read the setup guide

Skip to content
Check your stack
CVE-2026-99443

pps: generators: don't use the driver's info after unregister

Products / packages Linux

Published

Share

Severity and exploitation

Not in CISA KEVNo CVSS score

KEV coverage does not rule out exploitation.

KEV checked 22/11/2026, 12:00:32 UTC

Severity

unknown

CVSS measures technical severity, not the likelihood of an attack.

Known exploitation

Not listed in the checked CISA KEV catalog

Absence from CISA KEV does not rule out attacks.

Public exploit

Not established by this record

Missing evidence does not mean no public exploit exists.

Remediation

Fix status not established

No structured fix or guidance is available here. Check the latest publisher advisory.

What this means

The Linux kernel is affected by a vulnerability where the driver's info is used after unregister, potentially causing a slab-use-after-free error. This issue affects Linux kernel versions 6.14 and later, prior to versions 6.18.63, 7.3.2, and 7.4-rc1. An attacker with access to the system could exploit this weakness, but the exact impact is unclear.

Summarized by @cf/meta/llama-3.3-70b-instruct-fp8-fast. Verify details against the original sources.

Attack conditions

No attack-condition excerpt has been identified here. Review the full source description and references for authentication, network access, and configuration requirements.

Review supporting sources →

Affected versions

Check the exact model, release, and any platform requirements against your installation.

Linux · Linux

Linux

3 ranges

Compare with this publisher’s ranges. This does not inspect your installation.

affected

86b525bed2758878e788c9fb6b8fb281fd61bdb0 → before a7ba1a5a0c16d3aad161681b01933703419fd52d

git versions

86b525bed2758878e788c9fb6b8fb281fd61bdb0 → before ea2aaf6bda6ba90e92abe3aeaff426bba082c0eb

git versions

86b525bed2758878e788c9fb6b8fb281fd61bdb0 → before 4e8063cae337cb7328e6856235cf4de5d165516e

git versions

unaffected

unknown

Other versions: unaffected

Linux · Linux

Linux

5 ranges

Compare with this publisher’s ranges. This does not inspect your installation.

affected

6.14

unaffected

0 → before 6.14

semver versions

6.18.63 → through 6.18.*

semver versions

7.3.2 → through 7.3.*

semver versions

7.4-rc1 → through *

original_commit_for_fix versions

unknown

Other versions: affected

Automatic dependency matching is unavailable for this record. Use the product evidence and publisher’s instructions to check your installation.

What to do

Compare your installed product and version with the affected versions above. A matching product name alone does not confirm exposure.

No structured fix or remediation guidance is available here. Check the full source description and vendor’s latest advisory for a patch or workaround; do not assume another version is safe.

cve.new guidance unless attributed to a publisher. This page does not inspect your installation.

Public exploit evidence

No public exploit reference is identified in the imported evidence. This is not a claim that no exploit exists.

Original source description

Read the full publisher description

In the Linux kernel, the following vulnerability has been resolved:

pps: generators: don't use the driver's info after unregister

A file that was opened before pps_gen_unregister_source() keeps pps_gen, and with it the pointer to the driver's pps_gen_source_info. PPS_GEN_SETENABLE and PPS_GEN_USESYSTEMCLOCK keep using that pointer after the driver has gone:

  • pps_gen_tio allocates its info with devm_kzalloc(), so after an unbind both ioctls read freed memory, and SETENABLE calls the driver's enable() with its freed private data.

  • pps_gen-dummy does not set info->owner, so it can be unloaded while the file is open, and the ioctls then read the unloaded module's data and call its code.

TIO can't probe in a VM, as it needs ART. A test driver that registers its info in devm memory like TIO does, unbound while /dev/pps-gen0 is open, gives:

BUG: KASAN: slab-use-after-free in pps_gen_cdev_ioctl+0x4c1/0x580 Read of size 1 at addr ffff88800e647f38 by task ppsgen64/145 ... Freed by task 146: kfree+0x25a/0x6d0 release_nodes+0xd1/0x140 devres_release_all+0x10e/0x1a0 device_unbind_cleanup+0x71/0x250 device_release_driver_internal+0x41b/0x570 unbind_store+0xd9/0x100

and unloading pps_gen-dummy while its file is open oopses:

BUG: unable to handle page fault for address: ffffffffa0203040 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:pps_gen_cdev_ioctl+0x372/0x580

Protect info in the ioctl handler with a mutex, and clear it under the mutex on unregister, so that unregister waits for the ioctls using it and later ones fail with -ENODEV. PPS_KC_BIND does the same for a removed PPS device since commit 3649f9a6b897 ("pps: don't allow PPS_KC_BIND on removed devices"). The sysfs attributes need nothing new: they are removed, and their callbacks drained, before info is cleared.

References

3 sources

Inside the record

Evidence available

Package identity · not supplied
Version evidence
Remediation guidance · not supplied
Weakness classification · not supplied
Additional publishers · not supplied

Describes the evidence in this view, not whether the product is safe.

Original records

CVE-2026-99443

View the latest unmodified CVE JSON from the official source. It may be newer than this imported page.

cve.new JSON →

Environment requirements

These conditions apply together as specified by the publisher. A matching product name alone does not establish exposure.

Linux · platform conditions

Any condition may hold

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 6.14

Before: 6.18.63

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 6.14

Before: 7.3.2

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 6.14

Before: 7.4-rc1

Applicability preview
[
  {
    "nodes": [
      {
        "operator": "OR",
        "negate": false,
        "cpeMatch": [
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "6.14",
            "versionEndExcluding": "6.18.63"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "6.14",
            "versionEndExcluding": "7.3.2"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "6.14",
            "versionEndExcluding": "7.4-rc1"
          }
        ]
      }
    ]
  }
]
Contributing organizations · 1
Linux

Assigning organization

2026-11-19

Timeline

All times UTC
  1. Advisory published

    Publication date supplied by the source.

  2. Last imported by cve.new

    Latest catalog import, not the date we first saw this advisory.

What changed

Follow changes
No substantive changes have been recorded here yet. History starts when cve.new observes a change after tracking is enabled; earlier edits are not reconstructed.

Large field values are marked as truncated previews. Original source snapshots remain retained.