ovl: read the nlink xattr of every indexed non-dir
Severity and exploitation
KEV coverage does not rule out exploitation.
Severity
unknownCVSS measures technical severity, not the likelihood of an attack.
Known exploitation
Not listed in the checked CISA KEV catalog
Absence from CISA KEV does not rule out attacks.
Public exploit
Not established by this record
Missing evidence does not mean no public exploit exists.
Remediation
Fix status not established
No structured fix or guidance is available here. Check the latest publisher advisory.
What this means
In the Linux kernel, the following vulnerability has been resolved:
Source excerpt · LinuxAttack conditions
No attack-condition excerpt has been identified here. Review the full source description and references for authentication, network access, and configuration requirements.
Review supporting sources →Affected versions
Check the exact model, release, and any platform requirements against your installation.
Linux · Linux
Linux
4 ranges
Linux · Linux
Linux
Compare with this publisher’s ranges. This does not inspect your installation.
affected
fbd2d2074bde2e333d9a9eeda5864cd593fbe29c → before 07b000b5b458723ca85d67dbbe5f6359c0202cfc
git versions
fbd2d2074bde2e333d9a9eeda5864cd593fbe29c → before 9b50f28c22c948b0c134d5c5dbd62ea0ada97fc3
git versions
fbd2d2074bde2e333d9a9eeda5864cd593fbe29c → before ffe508adf85acdd57db01a234161e795b7403062
git versions
fbd2d2074bde2e333d9a9eeda5864cd593fbe29c → before eb644ed5c6d9afdb1554c41cef1f39d150fbc554
git versions
Other versions: unaffected
Linux · Linux
Linux
6 ranges
Linux · Linux
Linux
Compare with this publisher’s ranges. This does not inspect your installation.
affected
4.16
unaffected
0 → before 4.16
semver versions
6.12.117 → through 6.12.*
semver versions
6.18.61 → through 6.18.*
semver versions
7.3.2 → through 7.3.*
semver versions
7.4-rc1 → through *
original_commit_for_fix versions
Other versions: affected
What to do
Compare your installed product and version with the affected versions above. A matching product name alone does not confirm exposure.
No structured fix or remediation guidance is available here. Check the full source description and vendor’s latest advisory for a patch or workaround; do not assume another version is safe.
cve.new guidance unless attributed to a publisher. This page does not inspect your installation.
Public exploit evidence
No public exploit reference is identified in the imported evidence. This is not a claim that no exploit exists.
Original source description
Read the full publisher description
In the Linux kernel, the following vulnerability has been resolved:
ovl: read the nlink xattr of every indexed non-dir
With nfs_export=on, data written through a file handle to a lower file, i.e. a file that exists only in a lower layer of the overlay, can be lost on the next mount. A lookup of the file by name then returns -EIO. Also, a file with one name reports st_nlink 2 once it has been copied to the upper layer. After such a file is removed, its file handle can still open it until the next mount.
Before a lower file is changed for the first time, overlayfs copies it to the writable upper layer. This is called copy up.
The index directory is $workdir/index, where $workdir is the directory given by the workdir= option. Each entry is named after the file handle of a lower inode, so that overlayfs can get from the handle to the copied up inode.
With nfs_export=on, copy up indexes every non-directory: it copies the file to an entry in the index directory and then hard links that entry into the upper directory. The index entry is an extra link to the upper inode, so overlayfs stores the link count that users should see in the overlay.nlink xattr.
A file can also be opened by handle, either by an NFS client or by a process with CAP_DAC_READ_SEARCH calling open_by_handle_at(). If the file is not in the dcache, its overlay dentry is disconnected, i.e. it has no parent yet. Copy up then creates the index entry but no hard link in the upper directory. The index entry has i_nlink 1 and holds the only copy of the data written to the file.
ovl_get_nlink() reads the stored count. Its caller passes a default, which the function returns if there is no stored count. If the lower inode has i_nlink 1, the function returns the default without reading the xattr. That was correct as long as only lower files with multiple links were indexed.
On the next mount, ovl_verify_index() looks for orphans, i.e. index entries of files whose last name was removed. For an index entry with i_nlink 1, it passes a default of 0 to ovl_get_nlink() and treats a result of 0 as an orphan. Here the lower inode also has i_nlink 1, so the result is the default. ovl_indexdir_cleanup() then replaces the entry with a whiteout, which in the index marks a file as deleted. The written data is lost.
A lookup by name then returns -EIO, because a whiteout as the index entry of a lower file that still exists is a bad index.
ovl_get_inode() gets the wrong count the same way. Its default is the i_nlink of the upper inode, which includes the index entry, so a copied up file with one name reports st_nlink 2.
When that name is removed, the count drops to 1 rather than 0. ovl_nlink_end() replaces the index entry with a whiteout only at a count of 0, so the entry stays, and the handle of the removed file still opens it.
Reproduced by writing through open_by_handle_at() to an uncached lower file with one link. After a remount the data was lost, and the name returned EIO.
Fix this by adding an argument to ovl_get_nlink() that says whether the caller found an index entry, and by skipping the xattr only if the caller found none.
Known gaps:
- An index entry that a kernel without this patch left behind for a removed file now stays, and the handle of that file keeps working. The entry has i_nlink 1 and a stored count of 1, just like the entry of a file that was only written by handle. Without this patch, the next mount treated it as an orphan.
References
4 sourcesInside the record
Evidence available
Describes the evidence in this view, not whether the product is safe.
Original records
CVE-2026-99416View the latest unmodified CVE JSON from the official source. It may be newer than this imported page.
cve.new JSON →Environment requirements
These conditions apply together as specified by the publisher. A matching product name alone does not establish exposure.
Linux · platform conditions
Any condition may hold
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 4.16
Before: 6.12.117
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 4.16
Before: 6.18.61
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 4.16
Before: 7.3.2
Vulnerable product
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*From (inclusive): 4.16
Before: 7.4-rc1
Applicability preview
[
{
"nodes": [
{
"operator": "OR",
"negate": false,
"cpeMatch": [
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "4.16",
"versionEndExcluding": "6.12.117"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "4.16",
"versionEndExcluding": "6.18.61"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "4.16",
"versionEndExcluding": "7.3.2"
},
{
"vulnerable": true,
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "4.16",
"versionEndExcluding": "7.4-rc1"
}
]
}
]
}
]Contributing organizations · 1
Assigning organization
Timeline
All times UTCAdvisory published
Publication date supplied by the source.
Last imported by cve.new
Latest catalog import, not the date we first saw this advisory.
What changed
Follow changesLarge field values are marked as truncated previews. Original source snapshots remain retained.