Investigate in your agent.

Turn this advisory into a focused investigation. Ask your agent to check your project’s versions, explain the evidence, and suggest a compatible fix.

Your agent needs remote MCP support and access to https://cve.new/mcp.

Read the setup guide

Skip to content
Check your stack
CVE-2026-99312

KVM: x86: Unconditionally reset MMU context when emulating INIT

Products / packages Linux

Published

Share

Severity and exploitation

Not in CISA KEV

KEV coverage does not rule out exploitation.

KEV checked 22/11/2026, 12:10:35 UTC
Linux · CVSS:3.1 · 8.8
Assessment vectorCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

Severity

high8.8

CVSS measures technical severity, not the likelihood of an attack.

Known exploitation

Not listed in the checked CISA KEV catalog

Absence from CISA KEV does not rule out attacks.

Public exploit

Not established by this record

Missing evidence does not mean no public exploit exists.

Remediation

Fix status not established

No structured fix or guidance is available here. Check the latest publisher advisory.

What this means

In the Linux kernel, the following vulnerability has been resolved:

Source excerpt · Linux

Attack conditions

Note, like the Fixes commit, this bug only affects nested SVM as INIT is an unconditional intercept on VMX, i.e.

Excerpt from the original source description below.

Review supporting sources →

Affected versions

Check the exact model, release, and any platform requirements against your installation.

Linux · Linux

Linux

8 ranges

Compare with this publisher’s ranges. This does not inspect your installation.

affected

ed129ec9057f89d615ba0c81a4984a90345a1684 → before f55a3e4e08dc004b4bab7c1e9323d7e7e96e266a

git versions

ed129ec9057f89d615ba0c81a4984a90345a1684 → before 24f644ea26c2ebb7b14c3baa2aa92d37fde3095f

git versions

ed129ec9057f89d615ba0c81a4984a90345a1684 → before d47bae9eb33b3ca0843a0954b7d0cafb354c99b0

git versions

ed129ec9057f89d615ba0c81a4984a90345a1684 → before c7c288d178cb0b78d3464a616b16b1aa0b316049

git versions

6425c590d0cc6914658a630a40b7f8226aa028c3

git versions

d40ef0a511676bd65ca9acb295430c07af59ab85

git versions

5.15.81 → before 5.16

semver versions

6.0.11 → before 6.1

semver versions

unaffected

unknown

Other versions: unaffected

Linux · Linux

Linux

6 ranges

Compare with this publisher’s ranges. This does not inspect your installation.

affected

6.1

unaffected

0 → before 6.1

semver versions

6.12.118 → through 6.12.*

semver versions

6.18.64 → through 6.18.*

semver versions

7.3.5 → through 7.3.*

semver versions

7.4-rc2 → through *

original_commit_for_fix versions

unknown

Other versions: affected

Automatic dependency matching is unavailable for this record. Use the product evidence and publisher’s instructions to check your installation.

What to do

Compare your installed product and version with the affected versions above. A matching product name alone does not confirm exposure.

No structured fix or remediation guidance is available here. Check the full source description and vendor’s latest advisory for a patch or workaround; do not assume another version is safe.

cve.new guidance unless attributed to a publisher. This page does not inspect your installation.

Public exploit evidence

No public exploit reference is identified in the imported evidence. This is not a claim that no exploit exists.

Original source description

Read the full publisher description

In the Linux kernel, the following vulnerability has been resolved:

KVM: x86: Unconditionally reset MMU context when emulating INIT

Force an MMU reset when emulating an INIT even if paging was already disabled, as the MMU page role includes guest_mode (L2), i.e. an INIT while L2 is running with CR0.PG=0 will result in KVM running L1 with a stale MMU context.

Alternatively, the reset could be scoped strictly to paging being enabled or L2 being active, but SMM is also encoded in the page role. Even though it should be impossible for the vCPU to be INIT'd while SMM is active, there's zero value in not handling SMM. At that point, the only scenario where KVM doesn't need to reset the MMU context is on an INIT with the vCPU running in Real Mode or Unpaged Protect Mode, and while INIT in those modes is somewhat common, it's far from a hot path and re-initializing the MMU is not expensive, especially when the role isn't changing (KVM elides most of the re-configuration in that case).

Note, like the Fixes commit, this bug only affects nested SVM as INIT is an unconditional intercept on VMX, i.e. it's impossible to emulate INIT while L2 is active.

Temporarily keep the guest TLB flush when CR0.PG is being cleared even though it is fully redundant with the flush that is emitted on all INIT events (KVM itself only does RESET when a vCPU is being created, i.e. when CR0.PG must be '0').

References

4 sources

Inside the record

Evidence available

Package identity · not supplied
Version evidence
Remediation guidance · not supplied
Weakness classification · not supplied
Additional publishers · not supplied

Describes the evidence in this view, not whether the product is safe.

Original records

CVE-2026-99312

View the latest unmodified CVE JSON from the official source. It may be newer than this imported page.

cve.new JSON →

Environment requirements

These conditions apply together as specified by the publisher. A matching product name alone does not establish exposure.

Linux · platform conditions

Any condition may hold

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 6.1

Before: 6.12.118

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 6.1

Before: 6.18.64

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 6.1

Before: 7.3.5

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 6.1

Before: 7.4-rc2

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 5.15.81

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 6.0.11

Applicability preview
[
  {
    "nodes": [
      {
        "operator": "OR",
        "negate": false,
        "cpeMatch": [
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "6.1",
            "versionEndExcluding": "6.12.118"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "6.1",
            "versionEndExcluding": "6.18.64"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "6.1",
            "versionEndExcluding": "7.3.5"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "6.1",
            "versionEndExcluding": "7.4-rc2"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "5.15.81"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "6.0.11"
          }
        ]
      }
    ]
  }
]
Contributing organizations · 1
Linux

Assigning organization

2026-11-19

Timeline

All times UTC
  1. Advisory published

    Publication date supplied by the source.

  2. Source updated

    Latest modification date supplied by the source.

  3. Last imported by cve.new

    Latest catalog import, not the date we first saw this advisory.

What changed

Follow changes
  1. CVE · CVE-2026-99312

    Observed 2026-11-19T14:06:26.150Z · upstream updated 2026-11-19T13:52:45.586Z

    Severity assessment changed

    before

    []

    after

    [
      {
        "source": "Linux",
        "vector": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H",
        "score": 8.8
      }
    ]

Large field values are marked as truncated previews. Original source snapshots remain retained.

Showing up to 50 most recent observed changes.