Investigate in your agent.

Turn this advisory into a focused investigation. Ask your agent to check your project’s versions, explain the evidence, and suggest a compatible fix.

Your agent needs remote MCP support and access to https://cve.new/mcp.

Read the setup guide

Skip to content
Check your stack
CVE-2026-98749

tty: serial: max3100: shut down timer before freeing port

Products / packages Linux

Published

Share

Severity and exploitation

Not in CISA KEVNo CVSS score

KEV coverage does not rule out exploitation.

KEV checked 14/11/2026, 21:00:34 UTC

Severity

unknown

CVSS measures technical severity, not the likelihood of an attack.

Known exploitation

Not listed in the checked CISA KEV catalog

Absence from CISA KEV does not rule out attacks.

Public exploit

Not established by this record

Missing evidence does not mean no public exploit exists.

Remediation

Fix status not established

No structured fix or guidance is available here. Check the latest publisher advisory.

What this means

In the Linux kernel, the following vulnerability has been resolved:

Source excerpt · Linux

Attack conditions

No attack-condition excerpt has been identified here. Review the full source description and references for authentication, network access, and configuration requirements.

Review supporting sources →

Affected versions

Check the exact model, release, and any platform requirements against your installation.

Linux · Linux

Linux

8 ranges

Compare with this publisher’s ranges. This does not inspect your installation.

affected

7831d56b0a3544cbb6f82f76c34ca95e24d5b676 → before d1187a7deac1e90182372a188dfe33ddd2b53cba

git versions

7831d56b0a3544cbb6f82f76c34ca95e24d5b676 → before cbb3fcc7cd14396ccc1379c164d96a247331f2e6

git versions

7831d56b0a3544cbb6f82f76c34ca95e24d5b676 → before fb8cefd66a6055a313c993fa9e8bed9be9b088f6

git versions

7831d56b0a3544cbb6f82f76c34ca95e24d5b676 → before 158a07da2da720f2f98b4bea129212c6805d8ee0

git versions

7831d56b0a3544cbb6f82f76c34ca95e24d5b676 → before fb668620e3b163962dabe1a674725a07aa44ff4a

git versions

7831d56b0a3544cbb6f82f76c34ca95e24d5b676 → before 2c8614981d3e6e000427de0ab2426ab68274d850

git versions

7831d56b0a3544cbb6f82f76c34ca95e24d5b676 → before 247b8f680876313586aed4d267bfcceddc2b4901

git versions

7831d56b0a3544cbb6f82f76c34ca95e24d5b676 → before db0949bbd06db0a75b4b1076f1e25194be7d956a

git versions

unaffected

unknown

Other versions: unaffected

Linux · Linux

Linux

10 ranges

Compare with this publisher’s ranges. This does not inspect your installation.

affected

2.6.30

unaffected

0 → before 2.6.30

semver versions

5.10.273 → through 5.10.*

semver versions

5.15.224 → through 5.15.*

semver versions

6.1.191 → through 6.1.*

semver versions

6.6.160 → through 6.6.*

semver versions

6.12.113 → through 6.12.*

semver versions

6.18.56 → through 6.18.*

semver versions

7.2.10 → through 7.2.*

semver versions

7.3 → through *

original_commit_for_fix versions

unknown

Other versions: affected

Automatic dependency matching is unavailable for this record. Use the product evidence and publisher’s instructions to check your installation.

What to do

Compare your installed product and version with the affected versions above. A matching product name alone does not confirm exposure.

No structured fix or remediation guidance is available here. Check the full source description and vendor’s latest advisory for a patch or workaround; do not assume another version is safe.

cve.new guidance unless attributed to a publisher. This page does not inspect your installation.

Public exploit evidence

No public exploit reference is identified in the imported evidence. This is not a claim that no exploit exists.

Original source description

Read the full publisher description

In the Linux kernel, the following vulnerability has been resolved:

tty: serial: max3100: shut down timer before freeing port

max3100_shutdown() stops the polling timer but returns early during system suspend. If the SPI device is unbound before resume, the serial core does not call max3100_shutdown() again, so max3100_remove() frees the port while the timer remains armed. max3100_timeout() may then access the freed port and re-arm the timer.

Add final timer teardown to max3100_remove() and use timer_shutdown_sync() to prevent a racing callback from re-arming it. Also free the IRQ and destroy the workqueue there before freeing the port. Keep timer_delete_sync() in max3100_shutdown() so that a subsequent open() can re-arm the timer.

The workqueue is created before request_irq() and destroyed on both request_irq() failure and normal shutdown. Its presence at remove thus identifies the IRQ left registered when suspend bypasses shutdown.

Free the IRQ before destroying the workqueue, in both max3100_shutdown() and max3100_remove(), and cancel the pending work in between. free_irq() waits for a running interrupt handler to finish and no new handler can start afterwards, so a racing handler cannot queue work on a workqueue that is being destroyed; the force_end_work check in max3100_dowork() only narrows that window, as a handler delayed between the check and queue_work() could still run after the teardown has cleared the workqueue pointer. Cancelling the work also keeps destroy_workqueue() from waiting on a queued work item in case remove() ever runs while the freezable workqueue is still frozen, e.g. device removal during the resume window, before workqueues are thawed.

This issue was found by an in-house static analysis tool.

References

8 sources

Inside the record

Evidence available

Package identity · not supplied
Version evidence
Remediation guidance · not supplied
Weakness classification · not supplied
Additional publishers · not supplied

Describes the evidence in this view, not whether the product is safe.

Original records

CVE-2026-98749

View the latest unmodified CVE JSON from the official source. It may be newer than this imported page.

cve.new JSON →

Environment requirements

These conditions apply together as specified by the publisher. A matching product name alone does not establish exposure.

Linux · platform conditions

Any condition may hold

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 2.6.30

Before: 5.10.273

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 2.6.30

Before: 5.15.224

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 2.6.30

Before: 6.1.191

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 2.6.30

Before: 6.6.160

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 2.6.30

Before: 6.12.113

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 2.6.30

Before: 6.18.56

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 2.6.30

Before: 7.2.10

Vulnerable product

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*

From (inclusive): 2.6.30

Before: 7.3

Applicability preview
[
  {
    "nodes": [
      {
        "operator": "OR",
        "negate": false,
        "cpeMatch": [
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "2.6.30",
            "versionEndExcluding": "5.10.273"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "2.6.30",
            "versionEndExcluding": "5.15.224"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "2.6.30",
            "versionEndExcluding": "6.1.191"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "2.6.30",
            "versionEndExcluding": "6.6.160"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "2.6.30",
            "versionEndExcluding": "6.12.113"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "2.6.30",
            "versionEndExcluding": "6.18.56"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "2.6.30",
            "versionEndExcluding": "7.2.10"
          },
          {
            "vulnerable": true,
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionStartIncluding": "2.6.30",
            "versionEndExcluding": "7.3"
          }
        ]
      }
    ]
  }
]
Contributing organizations · 1
Linux

Assigning organization

2026-10-30

Timeline

All times UTC
  1. Advisory published

    Publication date supplied by the source.

  2. Source updated

    Latest modification date supplied by the source.

  3. Last imported by cve.new

    Latest catalog import, not the date we first saw this advisory.

What changed

Follow changes
No substantive changes have been recorded here yet. History starts when cve.new observes a change after tracking is enabled; earlier edits are not reconstructed.

Large field values are marked as truncated previews. Original source snapshots remain retained.