Investigate in your agent.

Turn this advisory into a focused investigation. Ask your agent to check your project’s versions, explain the evidence, and suggest a compatible fix.

Your agent needs remote MCP support and access to https://cve.new/mcp.

Read the setup guide

Skip to content
cve.newCreate a CVE report
Check your stack
CVE-2026-128910

DJI AeroScope Mobile: Hard-coded root password on the serial console

Products / packages DJI AeroScope Mobile (TP703) · DJI AeroScope Mobile (TP703) 1300 communications board firmware

Published

Share

Unsupported when assigned

NCSC.ch marked the affected products as already unsupported when this CVE was assigned. A patch may not be available. Review the vendor references for migration or mitigation guidance.

This tag describes support at assignment time, not current support for every related product.

Severity and exploitation

Not in CISA KEV

KEV coverage does not rule out exploitation.

KEV checked 15/11/2026, 01:50:31 UTC
NCSC.ch · CVSS:3.1 · 6.8
Assessment vectorCVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Severity

medium6.8

CVSS measures technical severity, not the likelihood of an attack.

Known exploitation

Not listed in the checked CISA KEV catalog

Absence from CISA KEV does not rule out attacks.

Public exploit

Not established by this record

Missing evidence does not mean no public exploit exists.

Remediation

Source guidance available

Review the recorded instructions. Guidance may be a workaround rather than a fixed version.

What this means

DJI AeroScope Mobile firmware 03.00.00.26 and 1300 communications board firmware 02.00.07.12 through 02.00.08.40 have a hard-coded root password, allowing an attacker with physical access to the serial console to log in as root. The password can be recovered offline. No network login service accepts this password by default.

Summarized by @cf/meta/llama-3.3-70b-instruct-fp8-fast. Verify details against the original sources.

Attack conditions

NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Excerpt from the original source description below.

Review supporting sources →

Affected versions

Check the exact model, release, and any platform requirements against your installation.

DJI · NCSC.ch

AeroScope Mobile (TP703)

1 range
NCSC.ch version evidence
Platforms: ARM

Compare with this publisher’s ranges. This does not inspect your installation.

affected

03.00.00.26

custom versions

unaffected

unknown

Other versions: unknown

DJI · NCSC.ch

AeroScope Mobile (TP703) 1300 communications board firmware

1 range
NCSC.ch version evidence
Platforms: ARM

Compare with this publisher’s ranges. This does not inspect your installation.

affected

02.00.07.12 → through 02.00.08.40

custom versions

unaffected

unknown

Other versions: unknown

Automatic dependency matching is unavailable for this record. Use the product evidence and publisher’s instructions to check your installation.

What to do

Compare your installed product and version with the affected versions above. A matching product name alone does not confirm exposure.

DJI AeroScope Mobile has been discontinued and is no longer supported by DJI. No fixed firmware is available. Operators should plan to replace affected units with a supported product and, until then, apply the workarounds.

NCSC.ch guidance ↗

Restrict physical access to deployed units and their serial console, and treat any unit that has left controlled custody as having a known root password. Network isolation does not mitigate this issue.

NCSC.ch guidance ↗

cve.new guidance unless attributed to a publisher. This page does not inspect your installation.

Public exploit evidence

No public exploit reference is identified in the imported evidence. This is not a claim that no exploit exists.

Original source description

Read the full publisher description

Use of hard-coded credentials (CWE-798) on the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an attacker with physical access to the board's serial console to log in as root. The same password hash is present on every unit and uses DES crypt, so the password can be recovered offline from the distributed firmware. No network login service accepts this password by default. Confirmed on a physical device.

NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.

References

3 sources
cyber-defence-campus.github.io/projects/vulnerabilities/CVE-2026-128910/
Security advisoryNCSC.ch
www.dji.com/aeroscope
Source referenceNCSC.ch
llorencroma/dji-aeroscope-root · repository
Source referenceNCSC.ch

Inside the record

Evidence available

Package identity · not supplied
Version evidence
Remediation guidance
Weakness classification
Additional publishers · not supplied

Describes the evidence in this view, not whether the product is safe.

Original records

CVE-2026-128910

View the latest unmodified CVE JSON from the official source. It may be newer than this imported page.

cve.new JSON →

Underlying weaknesses

The source’s classification of what caused the vulnerability.

CWE-798 ↗

CWE-798 Use of Hard-coded Credentials

NCSC.ch

Related →
CWE-916 ↗

CWE-916 Use of Password Hash With Insufficient Computational Effort

NCSC.ch

Related →
CWE-521 ↗

CWE-521 Weak Password Requirements

NCSC.ch

Related →
Contributing organizations · 1
NCSC.ch

Assigning organization

2026-11-13

Timeline

All times UTC

  1. Advisory published

    Publication date supplied by the source.

  2. Last imported by cve.new

    Latest catalog import, not the date we first saw this advisory.

What changed

Follow changes
No substantive changes have been recorded here yet. History starts when cve.new observes a change after tracking is enabled; earlier edits are not reconstructed.

Large field values are marked as truncated previews. Original source snapshots remain retained.